Free consultation hotline:139-2551-3728
customer service email:xiongdagooseneck@foxmail.com
Do you know how the metal formed hose is constructed?
Time:2023-07-16   Visits:1117
Do you know the specific structure of the metal formed hose? If you don't, then it is necessary to read this article. Today, Xiongsen will introduce the structure of the metal formed hose. The entire structure is composed of joints, corrugated tubes, and wire braids. The joints or flanges on both sides match the joints or flanges of the customer's pipeline. The inner tube of the metal formed hose is a thin-walled stainless steel corrugated tube with spiral or annular waves, and the wire braid is mainly made of stainless steel wire or steel strips woven according to certain parameters. The wire braid is the main pressure-bearing component of the metal formed hose installed in the pressure pipeline, used as a protection sheath for the corrugated tube. Depending on the pressure in the pipeline and the place of use, one or more layers of stainless steel wire or steel strips can be selected for weaving. The pressure range is generally between 0.6 and 32.0 MPa, and can reach around 42.0 MPa. Generally speaking, the main components of the metal formed hose are made of austenitic stainless steel. This material can ensure excellent temperature resistance and corrosion resistance. The working temperature range of the metal formed hose is very wide, ranging from -196 to 600 degrees. In addition, suitable stainless steel materials should be selected according to the corrosion of the medium in the pipeline to ensure the corrosion resistance of the hose. That's all for the introduction of the structure of the metal formed hose. Xiongsen will update more information about the metal formed hose frequently. Please stay tuned. Thank you for watching!